CGC STONE OEM TECHNICAL REPRESENTATIVE TO TROUBLESHOOT THE DUAL POINT DAVIT

STATEMENT OF WORK (SOW)

FOR

ALLIED SYSTEMS BOAT DAVIT MODEL DDP11000CTS

CGC STONE is experiencing issues with the dual point davit raising and lowering the FWD and AFT falls at varying rates, causing a loss of functionality of the constant tension winch system and misalignment of the hooks. The cutter has bypassed safety systems for emergency operation and can only operate in calm sea states.

1. 1. OBJECTIVE

The goal is for OEM techincal representative to troubleshoot the dual point davit constant tension, encoders, and related systems on CGC STONE.

           

OEM POC: Allied Systems – Daniel Nelson daniel.nelson@AlliedSystems.com 503-201-7124

The inspection shall include operatiCOLon of the dual point davit and the Constant Tension System while the cutter is at the pier, and verification of operation while cutter is underway.

Period of Performance: 07AUG25-10AUG25

The pierside service will be perfomed in the vicinity of the following address.

Cartagena, Columbia

After performing underway evaluation, cutter shall return technical representative to vicinity of Panama City, Panama

Please contact LTJG Christian Thorn at (510) 437-5483 or Christian.P.Thorn@uscg.mil for any questions regarding this SOW.

NOTICE OF INTENT TO SOLE SOURCE 70Z08525Q0029216

The Department of Homeland Security {DHS}, United States Coast Guard {USCG} Surface Forces Logistics Center {SFLC}, located at 1 Eagle Road Bldg 55, Alameda CA 94501 is issuing this Notice of Intent {NOI} to inform industry contractors of the Government's intent to Award a Sole Source Firm Fixed Price {FFP} Contract IAW Federal Acquisition Regulation {FAR} Part 12 and 13 procedures.

The intended Contractor ALLIED SYSTEMS., located at 21433 SW Oregon Sherwood, OR 97140, United States.

USCG SFLC requires: CGC STONE Requires tech rep assistance.

 procurement is being conducted using commercial item procedures pursuant to Federal Acquisition Regulation {FAR} Part 12 and FAR Part 13, specifically FAR 13.106-1{b}{1}, allowing the Contracting Officer

{KO} to solicit from one source.

The North American Industry Classification System {NAICS} for this requirement is 336611 - Ship Building and Repairing. The Product of Service Code for this requirement is 2090. This will not be a small business under the Small Business Administration {SBA} size standard for this sector.

This notice of intent is neither a formal solicitation nor a request for competitive proposals. No solicitation document is available, and telephone requests will not be honored. No award will be made on the basis of unsolicited quotations or offers received in response to this notice. Any response to this notice must show clear, compelling and convincing evidence that competition will be advantageous to

the Government. The intent of this synopsis is for informational purposes only. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. A determination by the Government not to compete this action based on this notice is solely within the discretion of the Government.

All inquiries and concerns must be addressed in writing via e-mail to Ms. Oneal at donna.j.o'neal@uscg.mil with the following information referenced in the subject line, Solicitation 70Z08525Q0029216. A determination by the Government not to compete this proposed procurement based on the responses to this notice is solely within the discretion of the Government. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement. All interested parties who are responsible, certified, and capable may identify their interest and may submit an offer or quotation which shall be considered by the agency no later than 8:00 AM Pacific Time

{PST} on August 19, 2025, to Ms. Oneal at donna.j.o'neal@uscg.mil

The interested parties bear full responsibility to ensure complete transmission and timely receipt.