Closed Solicitation · DEPARTMENT OF ENERGY
AI Summary
The Energy Department is seeking sources to provide scintillating fibers for a barrel imaging calorimeter project. The technical requirements include a minimum light yield of greater than 5 photoelectrons when tested with a Sr-90 source using a bialkali photomultiplier tube. Bidders must ensure compliance with mutually acceptable assessment methods. The deadline for submissions is March 15, 2024, at 4:00 PM EDT. BSA, LLC is the contracting entity for this opportunity.
BSA, LLC is looking for sources to provide scintillating Fibers. 3.1 Technical/Performance Characteristics Light yield: the average response to a Sr-90 source shall be greater than 5 photoelectrons measured using a bialkali photomultiplier tube 200 cm from the source, and the opposite end blackened (assessed via methods mutually acceptable to the BSA and Contractor). Diameter mean value and variation shall be 1.00 +/- 0.01 mm, RMS ?0.02 mm. Attenuation length for blue light > 4m. Batch to batch or lot to lot variation of light yield <15%. Batch to batch or lot to lot variation of attenuation length <10%. Emission spectrum in blue-green light Scintillation decay time <3ns Total length ~4500 km Delivery method in cans. Length of fibers 4.55 meters +/- 0.01m.
EIC SCINTILLATING FIBERS FOR BARREL IMAGING CALORIMETER is a federal acquisition solicitation issued by DEPARTMENT OF ENERGY. Review the full description, attachments, and submission requirements on SamSearch before the response deadline.
SamSearch Platform
AI-powered intelligence for the right opportunities, the right leads, and the right time.