City of Clear Lake Shores - Narcissus Rd Roadway & Drainage Improvements

The milling and resurfacing of an asphalt paved road. The rehabilitation of the roadway begins with using a milling machine to remove the top 4.5 inches of the distressed asphalt wearing course and a portion of the underlying aggregate base. This milled material is hauled and disposed of off-site, while the newly exposed base is proofrolled to identify localized base failure areas. Any identified failures are saw-cut, excavated, and patched using Type B Hot Mix Asphalt Concrete (Black Base). Following a thorough cleaning of the surface to ensure proper adhesion, a prime coat is spray-applied to the base course before placing and compacting a 2-inch asphaltic concrete level-up course. Install reinforcing grid and tack coat on leveling course. Tack coat is applied to facilitate bonding for a 2.5-inch surface course, which is compacted to the specified in-place density. Striping and signage shall be installed per the engineering plans before the road is opened to traffic. 

## Details **Bid/Project ID:** 2026-02 **Type of Work:** Milling and Paving **Pre-Bid Location:** 931 Cedar Road, Clear Lake Shores, Texas 77565 **Pre-Bid Notes:** The Clear Lake Shores Club House **Bid Location:** 931 Cedar Road, Clear Lake Shores, Texas 77565 **Bid Notes:** The Clear Lake Shores Club House **Engineer/Publisher:** Colliers Engineering & Design **Engineer Address:** 13501 Katy Fwy, 1350, Houston, Texas, 77079