SLED Opportunity · NEW YORK · NEW YORK
AI Summary
The City of Syracuse seeks sealed proposals for the Lodi Street Connector project involving striping and pavement markings. Bids due January 8, 2026, with a pre-bid conference on December 15, 2025. The project requires completion within 100 days or by August 14, 2026.
ADVERTISEMENT NOTICE TO CONTRACTORS FOR LODI STREET CONNECTOR PIN 3950.72 Sealed proposals will be received at Division of Purchase of the City of Syracuse, New York, 213 City Hall, Syracuse, New York, 13202, on January 8th 2026, for PIN 3950.72 Lodi Street Connector Project until 2:30 p.m. On the same day and immediately thereafter, the sealed proposals will be opened and publicly read by the Director of the Office of Management & Budget, Division of Purchase of the City of Syracuse, New York. The project provides for the striping & pavement markings installation as shown in the plans along Lodi Street. The Disadvantaged Business Enterprise (DBE) participation requirement for this project of 0%. The affirmative action goals include a minority utilization of 3.8% and utilization goal of 6.9% for women. Sets of plans and specifications for the work under this contract shall only be obtained from the Director of the Office of Management & Budget, Division of Purchase upon deposit of a new check or money order in the amount of $100.00, payable to the Commissioner of Finance of the City of Syracuse. Checks transferred from other jobs will not be accepted. To have bid documents mailed, please provide us with your Fed-Ex account number to be billed directly. Each bid must be accompanied by a certified check or bid bond, in the amount of five percent (5%) of the total maximum bid price (combination of base bid or alternate bid plus add-on items) for the contract in the form and subject to the conditions provided in the Information for Bidders. Pre-bid Conference: The City of Syracuse has scheduled a pre-bid conference in order to review all of the specific requirements of this contract. Attendance at the pre-bid is recommended but is optional. The pre-bid conference is scheduled for December 15th, 2025, at 09:00 a.m. to be held at The Dept. of Engineering Conference Room, 4th Floor, City Hall, 233 East Washington Street, Syracuse, New York 13202. Additional Advertisement Information per the Local Project Manual: Amendments/Addenda: No interpretation of the meaning of the plans, specifications, or other Contract Documents will be made to any bidder orally. Every request for such interpretation should be made in writing addressed to: City of Syracuse, Department of Engineering, 233 E. Washington Street, Room 401,Syracuse, NY 13202 Attn: John Kivlehan , E-mail: jkivlehan@syr.gov Fax (315) 448-8059 And to be given consideration must be received at least five (5) days prior to the date fixed for the opening of the bids. Any and all of such interpretations and any supplemental instructions will be in the form of written addenda to the Specifications which, if issued, will be mailed & e-mailed to all Bidders (at respective addresses furnished for such purposes) not later than three days (72 hours) prior to the date fixed for the opening of the bids. Failure of any Bidder to receive any such addendum or interpretation shall not relieve any bidder from any obligation under his bid as submitted. All addenda so issued shall become part of the Contract Documents. Failure to request an interpretation constitutes a waiver to later claim that ambiguities or misunderstandings caused a Bidder to improperly submit a bid or to inadvertently bid on certain items. Time for Performance of Contract: The time of completion for the Project shall be as follows: All work items of this contract shall be completed within 100 calendar days from the date of the Notice to Proceed or shall be completed by August 14th, 2026, whichever comes first. All work items of this contract shall be substantially completed 3 weeks before August 14th, 2026. The Bidder’s attention is directed to the liquidated damages provisions of Part “J” of Section 500 of these contract documents. NYSDOT Standard Specification Version Date: January 1, 2026 Required to use Equitable Business Opportunity (EBO) software Required to submit New York State Uniform Contracting Questionnaire (CCA-2) online for prime and subs Required to submit completed Non-Collusion Forms (Appendix 12-1A) Required to submit completed Lobbying Activities Form (Appendix 12-1A) Required for Contractor to be registered with NYSDOL prior to letting Required to submit DBE Participation Package (i.e., DBE commitments, DBE confirmations, and/or Good Faith Efforts) Required to submit Bidder’s List (Appendix 12-11 CONR 80LL) Bidder required to promptly notify contact of any errors, omissions, conflicts, ambiguity, etc. in/among contract documents NO residential or geographical restrictions or warranties Bid cannot be withdrawn within 45 days of letting The City reserves the rights to waive any informalities and to reject any and all bids Questions: Contact John Kivlehan, Division Engineer, Dept. of Engineering, Room 401, 233 E. Washington Street, Syracuse, NY 13202. E-mail: jkivlehan@syr.gov Additional information, referenced forms etc. are contained within the proposal once obtained. Business enterprises awarded an identical or substantially similar procurement contract within the past five years: South Clinton St Two Conversion Project: O.H. Striping, Inc. Disadvantaged Business Enterprise contracting goals (DBE) DBE Goal: 0.00%
SLED stands for State, Local, and Education. These are solicitations issued by state governments, counties, cities, school districts, utilities, and higher education institutions — as opposed to federal agencies.
SamSearch Platform
AI-powered intelligence for the right opportunities, the right leads, and the right time.