SLED Opportunity · SOUTH DAKOTA · SOUTH DAKOTA
AI Summary
Rockland County Sewer District seeks one ESSCO submersible vortex pump with specific construction and cooling features, 20 HP motor, and a 5-year warranty. Delivery within 12-14 weeks. Manufacturer approval required. No alternates accepted.
Rockland County Sewer District has a need to purchase one(1) . ESSCO model 3x12-20-4-460V torque fluid submersible vortex pump with a 100% recessed vortex style impeller capable of passing 3 inch diameter and long length solids. Each unit shall be constructed of heavy duty engineered Cast Iron with Ductile Iron impeller,Cast Iron volute, assembled with Stainless Steel hardware.The pump shall be painted with standard factory paint. Each pump shall be equipped with a Cool Agivent device which shall vent the pump case, cool the motor and agitate the wet well. The Cool Agivent shall provide enough cooling to dissipate any excess heat generated by the motor in the event of prolonged operation with the motor exposed. FM Approved or UL Listed 20 HP, 1750 RPM, 460/3/60hz., 210TY frame, submersible motor with Buna-N O-rings, Carbon/Ceramic upper mechanical seal with Buna-N elastomers and Carbon/Ceramic lower mechanical seal with Buna-N elastomers, 416 Stainless Steel shaft, Class F insulation, oil buffer zone, moisture sensing probes, built-in thermal overload protection 50 ft.motor leads, and ESSCO/Reliance five year warranty. The exterior of the motor shall be coated with standard factory paint. Approximate FLA-28 Pump shall be rated for 230GPM@104'TDH 210TY- Wear Plate- CI Mechanical Seal- Silicon Carbide Faces with Viton Elastomers Type 21 Replacement for S/N 99146 Delivery must be FOB Destination prepaid and allowed within 12-14 weeks All Manufacturer Warranties must be applicable. Bidders must have knowledge of the ESSCO Pump specified and be Manuf. approved to sell ESSCO Pumps to the County NO alternates will be accepted Rockland County Sewer District has a need to purchase one(1) . ESSCO model 3x12-20-4-460V torque fluid submersible vortex pump with a 100% recessed vortex style impeller capable of passing 3 inch diameter and long length solids. Each unit shall be constructed of heavy duty engineered Cast Iron with Ductile Iron impeller,Cast Iron volute, assembled with Stainless Steel hardware.The pump shall be painted with standard factory paint. Each pump shall be equipped with a Cool Agivent device which shall vent the pump case, cool the motor and agitate the wet well. The Cool Agivent shall provide enough cooling to dissipate any excess heat generated by the motor in the event of prolonged operation with the motor exposed. FM Approved or UL Listed 20 HP, 1750 RPM, 460/3/60hz., 210TY frame, submersible motor with Buna-N O-rings, Carbon/Ceramic upper mechanical seal with Buna-N elastomers and Carbon/Ceramic lower mechanical seal with Buna-N elastomers, 416 Stainless Steel shaft, Class F insulation, oil buffer zone, moisture sensing probes, built-in thermal overload protection 50 ft.motor leads, and ESSCO/Reliance five year warranty. The exterior of the motor shall be coated with standard factory paint. Approximate FLA-28 Pump shall be rated for 230GPM@104'TDH 210TY- Wear Plate- CI Mechanical Seal- Silicon Carbide Faces with Viton Elastomers Type 21 Replacement for S/N 99146 Delivery must be FOB Destination prepaid and allowed within 12-14 weeks All Manufacturer Warranties must be applicable. Bidders must have knowledge of the ESSCO Pump specified and be Manuf. approved to sell ESSCO Pumps to the County NO alternates will be accepted
SLED stands for State, Local, and Education. These are solicitations issued by state governments, counties, cities, school districts, utilities, and higher education institutions — as opposed to federal agencies.
SamSearch Platform
AI-powered intelligence for the right opportunities, the right leads, and the right time.