SamSearch Platform
AI-powered intelligence for the right opportunities, the right leads, and the right time.
Contract Category
26 federal contract opportunities classified as Manufacturing Materials.
AI Summary
The Watervliet Arsenal is soliciting bids for 324 each of aluminum bronze strip, NSN# 953500X074025, with specific dimensions and mechanical properties. The materials must meet ASTM standards and require inspection. This opportunity is classified under NAICS code 331420 and is not subject to Simplified Acquisition Proc…
NY
AI Summary
This opportunity involves the procurement of 4340 alloy steel bar, square, specifically for the 155mm M284 cannon at the Watervliet Arsenal. The specifications include a minimum length of 10 feet and a maximum of 12 feet, with specific dimensional tolerances. Interested bidders should prepare to meet the outlined mater…
NY
AI Summary
The Department of Defense is soliciting for 71 each of seamless alloy steel tubing, specifically 4340 per AMS-6484 specifications. The tubing dimensions are 7.75 + .062 inch OD, 5.75 + .062 inch ID, and 9.0 inch + .50 inch length. Certified test reports and contract data requirements are mandatory, along with required …
NY
AI Summary
The Department of Defense is seeking quotes for a Firm-Fixed Price contract to procure materials for the manufacture of a B-1B Nacelle Trainer. Quotes must acknowledge all amendments and be submitted by the specified close date. Delivery will be to the 502nd Trainer Development Squadron Warehouse in Texas.
TX
AI Summary
The Oak Ridge National Laboratory requires tungsten round bar and copper tungsten alloy. Interested bidders should refer to the Bill of Materials in Attachment D for detailed specifications. This opportunity is categorized under NAICS code 331491 and is a Request for Proposal.
TN
AI Summary
The Department of Justice is soliciting bids for injection molding raw materials through Federal Prison Industries, Inc. This opportunity is categorized under NAICS code 325211 and is not set aside for simplified acquisition procedures. Interested bidders should refer to the attached documentation for further details.
DC
AI Summary
The Naval Surface Warfare Center Philadelphia Division requires Portland Type 3 cement for the Naval Foundry and Propeller Center. This competitive RFQ is set aside for small businesses, with a Firm-Fixed-Price contract anticipated over a two-year period. Proposals will be requested following the official RFP publicati…
PA
AI Summary
The Department of Justice is seeking sources for injection molding pellets through Federal Prison Industries, Inc. This opportunity is categorized as a product and is currently in the Source Sought phase. Interested parties should refer to the attached documentation for further details.
DC
AI Summary
The Department of Homeland Security is soliciting quotations for eStrip™ GPX Type VII Corn (Starch-g-Acrylic) Blast Media. This is a brand-name requirement with a quantity of 9 containers. The closing date for offers is February 18, 2026. Only authorized distributors may submit proposals, and traceability to the OEM is…
NC
AI Summary
The Department of Defense is soliciting quotes for manufacturing materials under NAICS code 326130. This opportunity involves military supplies and requires adherence to specific quality assurance and packaging requirements. Interested vendors should review the technical documents associated with this solicitation and …
PA
AI Summary
NASA/NSSC requires Coated Alloy GRX-810 Powder and intends to issue a sole source contract to Carpenter Additive U.S. LLC, the sole provider. Interested organizations may submit their capabilities by 4:00 p.m. CST on January 8, 2026. This procurement will follow FAR Part 12 and FAR Part 13 procedures.
MS
AI Summary
The Department of Justice, through Federal Prison Industries, is seeking sources for edge banding used in office furniture manufacturing. This is a sources sought announcement, and no awards will be made. Interested parties must submit responses via email by January 06, 2026.
DC
AI Summary
The Naval Surface Warfare Center Carderock Division is seeking custom aluminum wire feedstock for use with Naval wire arc additive manufacturing systems. This opportunity is categorized as a Sources Sought notice, inviting potential suppliers to express their interest and capabilities.
MD
AI Summary
The Department of Defense is soliciting for brass round bar to support the Joint Manufacturing and Technology Center. Interested bidders should refer to Solicitation W519TC26QA044 for detailed requirements. This opportunity is classified under NAICS code 331420 and is not set aside for simplified acquisition.
IL
AI Summary
The Department of Energy is seeking various sizes, widths, and lengths of OPAN Felt or its domestic equivalent. Interested vendors should refer to Attachment C_Bill of Materials for detailed specifications. This opportunity is categorized under a Request for Quotation (RFQ) and falls under Simplified Acquisition Proced…
TN
AI Summary
The Naval Foundry and Propeller Center requires ERCuNiAl welding wire for the design, manufacture, and repair of propellers for the US Navy. This presolicitation opportunity is focused on procurement from the Original Equipment Manufacturer, Wisconsin Wire Works.
PA
AI Summary
UT-Battelle, LLC is seeking suppliers for 1200 pounds of 99.95% pure magnesium ingots, compliant with ASTM B92M-89, Grade 9995A. Interested vendors must meet specified size dimensions and provide a functional equivalent if necessary. This opportunity is part of a Department of Energy funded project.
TN
AI Summary
The Bureau of Engraving and Printing intends to award a sole source contract to SICPA Securink, Inc. for specialized currency inks. These inks will be used in the production of U.S. currency and must meet specific quality and compatibility requirements. Interested parties must submit their capability statements by Sept…
AI Summary
The General Services Administration is seeking bids for abrasive disks under a combined synopsis/solicitation. This opportunity is set aside for small businesses and includes an updated RFQ attachment. Interested vendors should review the details carefully.
TX
AI Summary
The General Services Administration is seeking suppliers for abrasive disks under a combined synopsis/solicitation. This opportunity is classified under NAICS code 327910 and is not subject to Simplified Acquisition Procedures. Interested vendors should refer to the attached documents for further details.
TX
Common questions about finding and winning Manufacturing Materials government contracts.