SamSearch Platform
AI-powered intelligence for the right opportunities, the right leads, and the right time.
Contract Category
100 federal contract opportunities classified as Metrology.
AI Summary
The National Institute of Standards and Technology is seeking information on Aerodynamic Aerosol Classifiers and Particle Mass Analyzers to meet specific technical requirements. This sources sought notice aims to identify potential vendors capable of providing these instruments, with a focus on ensuring high-fidelity m…
MD
AI Summary
The Department of Defense requires two Creaform HandySCAN Pro 3D scanners, including software licenses, calibration accessories, and operator training. This presolicitation aims to establish a metrology and reverse-engineering capability. The RFQ is expected to be issued on July 1, 2026, with awards based on technical …
TX
AI Summary
The Department of Defense is seeking sources for a short-term bridge contract for specialized calibration services at the Low Background Infrared facility. Interested parties must submit capability statements via email by June 29, 2026. The facility supports infrared calibration and requires immediate capability to ens…
OH
AI Summary
NASA's Calibration and Metrology Services V (CAMS V) opportunity has been canceled, and no solicitation will be issued. Interested parties are encouraged to monitor the CAMS V website for updates and further information regarding future opportunities.
TX
AI Summary
The Department of Commerce's National Institute of Standards and Technology is seeking a laser source for Q-switched metrology. This opportunity is a combined synopsis/solicitation and is categorized under NAICS code 334516. Interested bidders should refer to the attached RFQ and requirements specifications document fo…
MD
AI Summary
The National Institute of Standards and Technology is seeking sources capable of providing a high-speed lock-in/servo system for the Photonic ac-dc Thermal Transfer Standard project. This system is critical for advancing photonics-based metrology. Interested parties should respond with relevant product information and …
MD
AI Summary
The National Institute of Standards and Technology intends to negotiate a sole source purchase order for two Superconducting Nanowire Single-Photon Detectors (SNSPDs) from Quantum Opus, LLC. These detectors are essential for advancing quantum networking metrology and must be compatible with existing equipment. Interest…
MD
AI Summary
The Department of Commerce's National Institute of Standards and Technology is seeking sources for metrology-grade chilled mirror dew point hygrometers. Interested parties should refer to the attached document for full details regarding this opportunity.
MD
AI Summary
The National Institute of Standards and Technology is seeking information on the availability of a High-Field Electromagnet System for MRAM Metrology. This Sources Sought Notice aims to identify potential sources capable of providing the required system, which includes a bipolar power supply and meets specific technica…
MD
AI Summary
The National Institute of Standards and Technology is seeking sources for high-resolution and low-resolution wavelength meters for their Standard Photonic Thermometer project. The instruments must meet specific technical requirements and be compatible with each other. Interested vendors should respond with product deta…
MD
AI Summary
The Air Force is seeking information on potential sources for two Continuous Wave (CW) Lasers for calibration purposes at the Air Force Primary Standards Laboratory. Vendors must demonstrate their capability to meet specific laser performance requirements. Responses are due by June 12, 2026, and should include technica…
OH
AI Summary
The National Institute of Standards and Technology is seeking sources for the Pfeiffer Vacuum A100 L Pump, Model Number A100L31324, to replace a broken unit used in dilution refrigerators for ultra-low temperature experiments. Interested manufacturers should provide information on their capabilities to meet the specifi…
MD
AI Summary
The National Institute of Standards and Technology (NIST) seeks sources for the process development and fabrication of overlay metrology wafers using attenuated phase shift masks (APSM). This opportunity is a sources sought notice, aiming to identify potential vendors capable of meeting specific technical requirements.…
AI Summary
The Department of Commerce is seeking a single-mode 532 nm laser for a Brillouin light scattering spectrometer, aimed at high-speed metrology for magnetoelectronic devices. Interested vendors should refer to the attached documents for response instructions and additional details.
MD
AI Summary
The Department of Commerce's National Institute of Standards and Technology is seeking sources for an integrated superconducting magnet power system, specifically the Cryomagnetics model 4G-200s. This notice serves to identify potential suppliers capable of meeting the technical specifications required for critical exp…
MD
AI Summary
The Department of Defense is seeking quotes for a five-day instructor-led Metrology Course for 20 Quality Assurance Personnel, scheduled for June 8-12, 2026. This opportunity is a 100% small-business set-aside under NAICS Code 611519. Proposals are due by 8:00 AM EST on May 15, 2026, and must include detailed pricing a…
CT
AI Summary
The Naval Surface Warfare Center Crane requires routine maintenance for the Nikon Metrology XTV160 system. This is a sole source procurement, as only the OEM can provide the necessary services. Interested vendors must be registered in SAM and submit their offers by April 27, 2026, at 4:00 PM Eastern Time.
IN
AI Summary
The National Institute of Standards and Technology is seeking responses for a high-speed swept laser essential for the Standard Photonic Thermometer project. This sources sought notice aims to identify potential vendors capable of meeting specific technical requirements for photonic temperature metrology. Interested pa…
MD
AI Summary
The U.S. Department of Commerce, NIST, is seeking information on the availability of Silicon/Germanium Epitaxial Wafers for semiconductor manufacturing. This RFI aims to gather market insights to inform acquisition strategies. Responses are due by April 3, 2026, and should be sent to the provided email address.
MD
AI Summary
The National Institute of Standards and Technology intends to noncompetitively acquire a narrowband mid-IR laser with tunable wavelength and repetition rate. This acquisition supports the CHIPS Metrology Program and aims to enhance advanced AFM metrology for nanoscale materials. Responses from capable vendors are encou…
MD
Common questions about finding and winning Metrology government contracts.