Closed Solicitation · DEPARTMENT OF VETERANS AFFAIRS
AI Summary
The Department of Veterans Affairs is seeking sources for the replacement of water heaters at the Lyons VAMC. The opportunity includes specific models and features required for compatibility and performance. Interested vendors should review the detailed specifications provided for the Patterson-Kelley models PK-08D and PK-10D. This is a sources sought notice, not a request for proposals.
Qty 1 Patterson-Kelley Model PK-08D Semi-Instantaneous Water Heater rated to provide 27 GPM of Domestic Hot Water from 40-120F when supplied with 25 psig Inlet Steam and 5 psig in the Coil @ 1122#/hr. Heater to be furnished with the following features and controls to meet the specified demand: - Solid Copper Nickel Pressure Vessel rated for 150 psi ASME working pressure. - Factory Insulation. - 90/10 Double Wall Copper Nickel Tube Bundle rated for 150 psi ASME working pressure and 210F test pressure. - All bronze circulator pump, 1/6HP, NYC Trim Package, 115v/1ph/60Hz, with isolation valves, ball and check valves, and venturi tees. - 1 ½ Spence Pilot Operated, Self-Contained Steam Control Valve. - 1 ½ Wye Strainer. - ¾ ASME Temperature & Pressure Relief Valve at 150 psi. - ¾ ASME Pressure Only Relief Valve (Shipped Loose). - 1 ½ Float & Thermostatic Condensate Steam Trap & Strainer (Shipped Loose). - ½ Auxiliary Drip Tap (Shipped Loose). - ¾ Drain Valve Factory Installed. - Double Solenoid High Temperature Limit System with pre-wired control box. - Vertical Stand suitable for removal of heating section without disconnection of domestic water lines. - ¾ Vacuum Breaker Factory Installed. - 3 ½ Dial Thermometer & Bundle Steam Pressure Gauge. - Operation & Maintenance Manuals in electronic form. - Factory Authorized Start-Up & Training Tags: 276458 (WH-2) Qty 1 Patterson-Kelley Model PK-10D Semi-Instantaneous Water Heater rated to provide 65 GPM of Domestic Hot Water from 40-140F when supplied with 40 psig Inlet Steam and 25 psig in the Coil @ 3469#/hr. Heater to be furnished with the following features and controls to meet the specified demand: - Solid Copper Nickel Pressure Vessel rated for 150 psi ASME working pressure. - Factory Insulation. - 90/10 Double Wall Copper Nickel Tube Bundle rated for 150 psi ASME working pressure and 210F test pressure. - All bronze circulator pump, 1/6HP, NYC Trim Package, 115v/1ph/60Hz, with isolation valves, ball and check valves, and venturi tees. - 2 ½ Spence Pilot Operated, Self-Contained Steam Control Valve. - 2 ½ Wye Strainer. - 1 ASME Temperature & Pressure Relief Valve at 150 psi. - 1 ½ ASME Pressure Only Relief Valve (Shipped Loose). - 1 ½ Float & Thermostatic Condensate Steam Trap & Strainer (Shipped Loose). - ½ Auxiliary Drip Tap (Shipped Loose). - ¾ Drain Valve Factory Installed. - Double Solenoid High Temperature Limit System with pre-wired control box. - Vertical Stand suitable for removal of heating section without disconnection of domestic water lines. - ¾ Vacuum Breaker Factory Installed. - 3 ½ Dial Thermometer & Bundle Steam Pressure Gauge .
4520--LYONS VAMC WATER HEATER REPLACEMENT BRAND SPECIFIC TO ENSURE HOOKUPS ARE COMPATIBLE NO ADDITIONAL PIPING BEING CONSIDERED is a federal acquisition solicitation issued by DEPARTMENT OF VETERANS AFFAIRS. Review the full description, attachments, and submission requirements on SamSearch before the response deadline.
SamSearch Platform
AI-powered intelligence for the right opportunities, the right leads, and the right time.