Closed Solicitation · DEPARTMENT OF COMMERCE

    Amendment to Solicitation for High Finesse Dual Wavelength Reference Cavity

    DEPARTMENT OF COMMERCE
    Sol. 1333ND25QNB680097Special Notice
    Closed
    STATUS
    Closed
    closed May 27, 2025
    POSTED
    May 20, 2025
    Publication date
    NAICS CODE
    334516
    Primary industry classification
    PSC CODE
    6640
    Product & service classification

    AI Summary

    The Department of Commerce has issued an amendment to the solicitation for a High Finesse Dual Wavelength Reference Cavity, extending the response time and providing clarifications on product requirements. Bidders should note that a fiber input is required for the collimator assembly, and the contractor must ensure proper mode matching of light into the optical cavity. Additionally, photodetectors must have a bandwidth of at least 10 MHz and an input current noise of less than 7 pA/Sqrt(Hz).

    Contract details

    Solicitation No.
    1333ND25QNB680097
    Notice Type
    Special Notice
    Posted Date
    May 20, 2025
    Response Deadline
    May 27, 2025
    NAICS Code
    334516AI guide
    PSC / Class Code
    6640
    Contract Code
    1300
    Primary Contact
    Elizabeth Timberlake
    AI Product/Service
    product

    Description

    AMENDMENT TO SOLICITATION HIGH FINESSE DUAL WAVELENGTH REFERENCE CAVITY CLARIFICATION/QUESTIONS AND RESPONSES AND EXTENSION OF RESPONSE TIME Questions: Request for more details about the product requirements: The input signal (light): free-space input or fiber input? If free-space input, then the light beam size, collimated or divergent one? For the Photodetectors, any requirements on the speed of the response (bandwidth)? Noise requirement, …. Response: A fiber input to the collimator assembly modules is specified in A.12 of the requirements document. Since the modules must be pre-aligned, the fiber input that is used for alignment should remain attached to the system and be included with it. The contractor is responsible for mode matching the light from the fiber into the optical cavity (or cavities) using a set of lenses and configuring additional optics specified in A.12 and A.13 to generate Pound-Drever-Hall locking signals. The photodetectors must have a bandwidth sufficient for Pound-Drever-Hall locking to the optical reference cavity, at least 10 MHz. The input current noise for the photodetectors should be < 7 pA/Sqrt(Hz) (which is approximately less than 14 pW/Sqrt(Hz) of noise equivalent power).

    Key dates

    1. May 20, 2025Posted Date
    2. May 27, 2025Proposals / Responses Due

    AI search tags

    Frequently asked questions

    Amendment to Solicitation for High Finesse Dual Wavelength Reference Cavity is a federal acquisition solicitation issued by DEPARTMENT OF COMMERCE. Review the full description, attachments, and submission requirements on SamSearch before the response deadline.

    SamSearch Platform

    Stop searching. Start winning.

    AI-powered intelligence for the right opportunities, the right leads, and the right time.