CNC LATHE - NAKAMURA-TOME WT300MMY-F014

LATHE

The only commercially available Turning Center with Live Tooling found to have all the Primary and Secondary Requirements described below combined into one machine is the Nakamura - Tome WT300MMY-F014.

Primary Requirements for the CNC Turning Center with Live Tooling:

• Tools driven by direct drive motors built into the turrets
• 25 HP A2-8 Spindle on both Right and Left
• 4" (102mm) Bar capacity on both spindles
• Fully closed loop control for X, Y & Z axes on both turrets having direct scale (magnetic) feedback.
• Fit within the maximum available area of 18 ft -0 inches x 18 ft - 0 inches
• Positioning accuracy of less than .0002 inch
• Airbag Collision Protection (Nakamura Only)

Secondary Requirements for the CNC Turning Center with Live Tooling:

• Basic Machine
  • 2-turret specification (BMT 65)
• Control
  • Human Machine Interface (HMI) Operating Terminal with 19. 0" touch control display screen and Power failure Package.
  • Fanuc F32iB CNC controller software
  • Dual USB Ports
  • Maintenance + Alarm Trouble Shooting
  • Remote service capability
  • Machine data connector
  • Production package - high speed canned cycles
  • Ethernet
• Screen Text
  • Screen display English
  • Language on operating system screen: English
  • Language on NC Screen: English
  • Language on PC Screen: English
• Spindle
  • Left Spindle (Main Spindle)
    • Through- spindle hole dia. 102 mm
    • Bar stock machining capacity dia. 4"
    • Maximum spindle speed 2500 rev/ min
    • Output 3 0 min continuous 15 /18 kW
    • Continuous Torque Rating (133 lb/ft)
    • 1 2" Chuck for left spindle (main spindle)
    • Left spindle hollow cylinder set for 12-inch hollow chuck for bar diameter 4.0 in.
    • Full C- axis (CF- Control)
    • C- Axis Clamp Braking Torque (188 lb/ft)

• • • Polar Coordinate Interpolation
    • Cylindrical Interpolation
• Right Spindle (Sub Spindle)
  • Through- spindle hole dia. 102 mm
  • Bar stock machining capacity dia. 4"
  • Maximum spindle speed 25 00 rev/ min
  • Output 3 0 min continuous 1 5 /1 8 kW
  • Continuous Torque Rating (133 lb/ft)
  • 1 2" Chuck for right spindle (sub spindle)
  • Left spindle hollow cylinder set for 12-inch hollow chuck for bar diameter 4. 0 in.
  • Full C- axis (CF- Control)
  • C- Axis Clamp Braking Torque (18 8 lb/ft)
  • Polar Coordinate Interpolation
  • Cylindrical Interpolation

• Turrets
  • Turret 1:
    • 24 station BMT 65
    • 12 Station Live Tool
    • Servo Drive Index
    • Y axis
    • Rotating Tool Spindle Speed 3 600 rev/ min
    • Rotating tool 5 .5 /3 .7 Kw - 7 . 5 HP
  • Turret 2:
    • 24 station BMT 65
    • 12 Station Live Tool
    • Servo Drive Index
    • Rotating Tool Spindle Speed 3 600 rev/ min
    • Rotating Tool 5 .5 /3 .7 Kw - 7.5 HP
• Coolant Supply / Chip Removal
  • Water-Soluble coolant
  • Chip conveyor (right discharge)
    • Filtration Accuracy:  50 um approximately 90%
    • Carrying Amount
      • Long Chip: 794 L/h
      • Short Chip: 13 L/h
  • High pressure coolant system for two turret specifications
    • Chip Blaster F2-60
    • One pump for each turret (24 HP)
    • 92. 5 Gallon Tank
• Measuring / Monitoring
  • Manual in- machine tool pre- setter (removable type, Left Spindle and Right Spindle)
  • Full closed loop control for X axis (turret 1) direct scale feedback, resolution 0. 01 um
  • Full closed loop control for X axis (turret 2) direct scale feedback, resolution 0. 01 um

• • Full closed loop control for Z axis (turret 1 ) direct scale feedback, resolution 0. 01 um
  • Full closed loop control for Z axis (turret 2) direct scale feedback, resolution 0. 01 um
  • Manual Machine tool pre-setter (Left Spindle side)
  • Manual Machine tool pre-setter (Right Spindle side)
• Automation
  • Signal lamp 4 colors (red, yellow, green, blue)
  • 1/F for exchanging control signals between the machine and peripheral equipment using EtherNet/IP
  • Interface for Bar feeder (EtherNet/lP Interface) with terminal block for power supply
• Power Requirements
  • 220 volts, 3 phase, 72 KVA
• Control
  • High Speed Canned Cycle
  • Optional Block Skip (soft key type 2- 9)
  • X axis movement direction compliant with ISO standard
• Construction
  • Bar feeder
  • Spindle Liners 1 pc for 1.00" RS
  • Coolant collector extension
• Tools driven by direct drive motors built into the turrets
• Fit within the maximum available areas of 18 ft -0 in x 18 ft -0 in
• Positioning accuracy of less than .0002 inch
• Special Construction
  • Bar Feeder

Additional Parts / Products:

LNS TurboChip Conveyor Hinge Belt Type. Right Discharge

LNS Quick Load Servo 105 + BarfeederV ."1/4 to 4-1 /8 "

LNS Quick Load Servo Barfeeder Installation

S teel Spindle Liners for Main Spindle 3 /8 " - 4" 91/4" Increments Qty 13)

S teel Spindle Liners for Second Spindle 3 /8 " - 4" 91/4" Increments Qty 13) Samchully JB-M312 First Spindle

Samchully JB-M312 Second Spindle

High Pressure Coolant both turrets and spindle flush Chip Blaster F2-60

WTO Rotary Tools:

48 -107658 -HP - O. D. Cutting Holder - (4 ea.)

48 -107660 - Combination Tool Holder - (4 ea.)

48 -100204 - Cut-off Holder - (2 ea.)

48 -102279R - Cut-off Holder Right - (2 ea.)

48 -102279l - Cut-off Holder Left - (2 ea.)

420132020 - Straight Drill/Milling Unit, ER32 QF, IC-EC - (4 ea.)

420132019-65 - Straight Drill/Milling Unit, ER32 QF, EC - (4 ea.) 420532026-65 - Face Mill/ Drill Unit, ER32 QF, IC-EC - (4 ea.)

420532025 -65 - Face Mill/ Drill Unit, ER32 QF, EC - (4 ea.)

410120030-65

- Straight Offset Drill/Milling Unit, ER32, EC - (4 ea)

420532043-65

- Right Angle Drill/Milling Unit, Both S ides, ER32 QF, EC - (4 ea)

410120031-65

- Straight Offset Drill/Milling Unit, ER32, IC-EC - (4 ea)

410113002-65

- Straight Offset Drill/Milling Unit, ER20, EC - (4 ea)

410120023-65

- Straight Offset Drill/Milling Unit, ER32, EC - (4 ea)

410113003-65

- Straight Offset Drill/Milling Unit, ER20, IC-EC - (4 ea)

420225014-65

- Right Angle Drill/Milling Unit, ER25, EC - (4 ea)

420525015-65

- Right Angle Drill/Milling Unit, ER25 QF, IC-EC - (4 ea)

420532031-65

- Face Drill/Milling Unit, ER32 QF, EC - (4 ea)

420532032-65

- Face Drill/Milling Unit, ER32 QF, IC-EC - (4 ea)

411010000-65

- Adjustable Angle Drill/Milling Unit, ER1 6, EC - (2 ea)

411010001-65

- Adjustable Angle Drill/Milling Unit, ER1 6, IC-EC - (2 ea)

411007001-65

- Adjustable Angle Drill/Milling Unit, ER1 1, EC - (2 ea)

411007000-65

- Adjustable Angle Drill/Milling Unit, ER1 1, EC - (2 ea)

411500001-65

- Offset Slitting Saw Unit, Type 1 4-2 - (2 ea)

414532003-65

- Broaching Unit, TN765050 - (1 ea)

Reduction Sleeve 1 -1 /2" (2 Sets)

2400150038 - 3 /8 "

2400150050 - 1 /2"

2400150063 - 5 /8 "

2400150075 - 3 /4"

2400150088 - 7/8 "

24001501 00 – 1.0"

24001501 25 -  1-1 /4"

ER 11 Collets (2 Sets)

190011000 - (.276-.020)

ER 16 Collets (2 Sets)

190016000- (. 394 -.020)

ER 20 Collets (2 Sets)

190020000- (.512-.039)

ER 25 Collets (2 Sets)

190025000- (.630-.039)

ER 32 Collets (2 Sets)

190032000- (.787-.079)

ER 11 Collets Sealed (2 Sets)

191011013 - (.125)

191011019 - (.188)

191011025 - (. 25)

ER 1 6 Collets Sealed (2 Sets)

191016013 - (.125)

191016019 - (. 188)

191016025 - (. 25)

191016031 - (. 313)

191016038 - (.375)

ER 25 Collets Sealed (2 Sets)

191016013 - (. 125)

191016019 - (. 188)

191016025 - (. 25)

191016031 - (. 313)

191016038 - (. 375)

191016044 - (. 438)

191016050 - (. 5)

191016056 - (. 563)

191016063 - (. 625)

ER 32 Collets Sealed (2 Sets)

191032013 - (. 1 25)

191032019 - (. 188)

191032025 - (. 25)

191032031 - (.313)

191032038 - (.375)

191032044 - (.438)

191032050 - (.5)

191032056 - (.563)

191032063 - (.625)

191032075 - (.75)

Interchangeable Milling Arbors (2 Sets)

160015142 - (.625)

160019142 - (.75)

160023142 - (.875)

160025142 - (.1.0)

ER 25 QF Collet Chuck Adapter (2 Sets)

320025010 - (ER16)

320025013 - (ER20)

320025016 - (ER25)

ER 25 QF Collet Chuck Adapter Short (2 Sets)

320025010-07 - (ER16)

320025013-09 - (ER20)

ER 25 QF Collet Chuck Adapter Long (2 Sets)

320025007-40 - (ER11)

320025010-50 - (ER16)

ER 25 QF Weldon/Whistle Notch Shank Adapter (2 Sets)

3201250250 - (. 25)

3201250312 - (.313)

3201250375 - (.375)

3201250500 - (.5)

3201250625 - (.625)

3201250750 - (.75)

ER 25 QF Combination Mill Adapter (2 Sets)

3202250750 - (.075)

3202251000 - (.1.0)

ER 25 QF Blank (5 ea.)

329025000

ER 25 QF Protection Cover (1 0 ea.)

337025000

ER 25 QF Master Gauge (1 ea.)

339125000

ER 32 QF Collet Chuck Adapter (2 Sets)

320032013 - (ER20)

320032016 - (ER25)

320032020 - (ER32)

ER 32 QF Collet Chuck Adapter Short (2 Sets)

320032013 -07 - (ER20)

320032016-07 - (ER25)

ER 32 QF Collet Chuck Adapter Long (2 Sets)

320032007-50 - (ER11)

320032010-60 - (ER16)

ER 32 QF Weldon/Whistle Notch Shank Adapter (2 Sets)

3201320250 - (.25)

3201320312 - (. 313)

3201320375 - (.375)

3201320500 - (.5)

3201320625 - (.625)

3201320750 - (.75)

ER 32 QF Combination Mill Adapter (2 Sets)

3202320750 - (.075)

3202321000 - (1.0)

3202321250 - (1. 25)

ER 32 QF Blank (5 ea.)

329032000

ER 32 QF Protection Cover (10 ea.)

337032000

ER 32 QF Master Gauge (1 ea.)

339132000

One Hand Wrenches/Sets

0067732000 (5 ea.)

0067725001 (5 ea.)

00675000958 (5 ea.)

00675000591 (5 ea.)

00675000515 (5 ea.)

00675000902 (5 ea.)

00675000914 (5 ea.)

00675000448 (5 ea.)

Installation: Contractor shall provide personnel to oversee equipment assembly, installation, startup and test prior to equipment acceptance and commissioning.

Calibration/ Setup: Contractor personnel shall perform all calibration, verification and performance testing of the equipment after installation and demonstration of proper operation prior to Government customer providing acceptance.

Training: Contractor shall provide on- site orientation training for this equipment.

NOTES

• FANUC Brand Drives and Control are a must to coincide with current programming and minimize training.
• WTO live Tooling is the current brand we use in the shop.