NOTICE OF INTENT TO SOLE SOURCE A HIGH RADIANCE UV-NIR LIGHT SOURCE WITH MONOCHROMATOR

Notice ID Number:  NIST-SS25-46 

Title: Notice of Intent to Sole Source a High radiance UV-NIR light source with Monochromator 

The National Institute of Standards and Technology (NIST) is seeking information from sources that may be capable of providing a high radiance UV-NIR light source with monochromator. If no alternate sources are identified, the Government intends to issue a Sole Source Award to Hamamatsu Corp. located at 360 Foothill Road, Bridgewater, NJ 08807 under the authority of FAR 13.106-1(b); only one source reasonably available. The North American Industry Classification System (NAICS) code for this acquisition is 334516.    

BACKGROUND 

The National Institute of Standards and Technology (NIST), Physical Measurement Laboratory (PML) Surface and Interface Metrology Group requires a High radiance UV-NIR light source with Monochromator to perform refractometry and dark-field microscopy.  It is required that the light source comes integrated with a monochromator to enable narrowband wavelength selection when used with the refractometer.  These measurements will enable traceability of the project’s microscopy measurements, and the measured refractive index dispersion relations will be used to quantify the composition of particles measured with light scattering microscopes. The light source is also required for high-radiance illumination of a dark-field microscope, which will be used to characterize individual nanoparticles. The dark-field microscope requires illumination with the full broadband output of the light source. The light source will be shared between a dark-field microscopy and refractometry apparatus. 

General Requirements: 

The Contractor shall provide the following high radiance UV-VIS-NIR light source with monochromator (quantity 1) that meets the following minimum specifications:  

1. The light source shall have incoherent, broadband spectral output covering the wavelength range of 350 nm to 1000 nm or broader.  

2. The light source must come integrated with a monochromator to enable wavelength band selection across the 350 nm to 1000 nm wavelength range, with the output coupled to an optical fiber. 

3. The optical fiber must be connected by a standard SMA or FC/PC interface such that the optical fiber can be easily removed by the user and replaced with a different commercially available fiber. 

4. The light source’s monochromator must have an operating mode to enable full broadband output (350 nm to 1000 nm) into the optical fiber. 

5. The monochromator bandwidth must be less than 10 nm when light is coupled into a 600 micrometer core-diameter optical fiber. 

6. When light is coupled into a 600 micrometer core-diameter optical fiber, the in-band light flux must be equal to or greater than… 

7. 0.1 mW across the entire 350 nm to 1000 nm wavelength range. 

8. 0.5 mW across the visible (400 nm to 700 nm) wavelength range. 

9. The monochromator must be automated and controllable via a computer.  

10. After an initial warm up time, the output power shall have a nominal stability of 5% or smaller. 

11. The light source shall come with software to control the instrument and monochromator. A programming software development kit, dll file, or similar must be included to allow NIST to control the instrument with custom written software. 

12. The light source shall operate on 120V for all components. 

13. If necessary for normal operation, the light source shall come with a water chiller and all necessary cabling and tubing. 

14. The light source shall include all necessary power supplies, cables, adapters, etc. for normal operation, with the exception of nitrogen gas for purging (if necessary), which will be supplied by NIST. 

15. An installation and user manual shall be included with the light source which fully describes proper set-up, installation, and usage. 

NIST is seeking information from sources that may be capable of providing a solution that will achieve the objectives described above. 

HOW TO RESPOND TO THIS NOTICE 

In responding to this notice, please DO NOT PROVIDE PROPRIETARY INFORMATION. Please include only the following information, readable in either Microsoft Word 365, Microsoft Excel 365, or .pdf format, in the response:  Submit the response by email to the Primary Point of Contact and, if specified, to the Secondary Point of Contact listed in this notice as soon as possible, and preferably before the closing date and time of this notice.  Please note that to be considered for award under any official solicitation, the entity must be registered and “active” in SAM at the time of solicitation response. 

• Provide the complete name of your company, address, name of contact for follow-up questions, their email, their phone number and, if your company has an active registration in https://sam.gov, your company’s Unique Entity ID (UEI). 

• Identify the equipment that your company sells that can meet the objectives addressed in the BACKGROUND section of this notice.  For each product recommended to meet the Government’s requirement, provide the following: 

• Manufacturer name 

• Model number 

• Technical specifications 

• If your company is not the manufacturer, provide information on your company’s status as an authorized reseller of the product(s) 

• Describe performance capabilities of the product(s) your company recommends to meet the Government’s requirements.  Additionally, if there are other features or functions that you believe would assist NIST in meeting its objectives described above, please discuss in your response. 

• Discuss whether the equipment that your company sells and which you describe in your response to this notice may be customized to specifications and indicate any limits to customization. 

• Identify any aspects of the NIST market research notice, including instructions, and draft minimum specifications in the BACKGROUND section you cannot meet and state why.  Please offer suggestions for how the market research notice and draft minimum specifications could be made more competitive. 

• State whether the proposed equipment is manufactured in the United States and, if not, state the name of the country where the equipment is manufactured.  

• Identify any plans/possibilities for changes in manufacturing location of the aforementioned equipment and provide relevant details, including timeline. 

• For the NAICS code listed in this notice: 

• Indicate whether your company is (a) a small business or (b) other than small business.  See the Table of Small Business Size Standards and the associated .pdf download file for small business size standards and additional information. 

• If you believe the NAICS code listed in this notice is not the best NAICS code for the type of product addressed in this notice, identify an alternative NAICS code that you believe would be more appropriate for the planned procurement.   

• Describe services that are available with the purchase of the aforementioned equipment from your company such as installation, training, and equipment maintenance.  

• Describe standard terms and conditions of sale offered by your company for the recommended equipment such as: delivery time after your company accepts the order; FOB shipping terms; manufacturer warranty (including details regarding nature and duration); if available, description(s) of available extended warranty; equipment setup and test; operator and service instruction manual(s); cleanup after installation; and if applicable, other offered services.  Provide a copy of manufacturer standard terms and conditions that typically relate to the sale of the specified equipment, if available. 

• State whether your company offers facility renovation services related to installation of the recommended equipment at its delivery destination, if required per the NIST-identified minimum specifications, and provide description of said services.  Indicate if your company performs the facility renovation services or typically subcontracts the work to another company.  Indicate if your company would be interested in inspecting the intended installation site during the market research phase. 

• State published price, discount, or rebate arrangements for recommended equipment and/or provide link to access company’s published prices for equipment and services.   

• If the recommended equipment and related services are available for purchase on any existing Federal Supply Schedule contract(s) or other contracts against which NIST may be able to place orders, identify the contract number(s) and other relevant information. 

• Identify any customers in the public or private sectors to which you provided the recommended or similar equipment.  Include customer(s) information: company name, phone number, point of contact, email address.  

• Provide any other information that you believe would be valuable for NIST to know as part of its market research for this requirement. 

• State if you require NIST to provide additional information to improve your understanding of the government’s requirement and/or would like to meet with NIST representatives to discuss the requirement and the capabilities of the identified equipment. 

QUESTIONS REGARDING THIS NOTICE 

Questions regarding this notice may be submitted via email to the Primary Point of Contact and the Secondary Point of Contact listed in this notice. Questions should be submitted so that they are received by May 28,2025. If the Contracting Officer determines that providing a written amendment to this notice to document question(s) received would benefit other potential respondents, the questions would be anonymized, and a written response to such question(s) would be provided via an amendment to this notice. 

IMPORTANT NOTES 

This notice is for market research purposes and should not be construed as a commitment by NIST to issue a solicitation or ultimately award a contract.  There is no solicitation available at this time. 

This notice does not obligate the Government to award a contract or otherwise pay for the information provided in response.  

NIST reserves the right to use information provided by respondents for any purpose deemed necessary and legally appropriate. 

Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organization’s capability.  

Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted.  

After a review of the responses received, a synopsis and solicitation may be published on GSA’s eBuy or SAM.gov. However, responses to this notice will not be considered an adequate response to any such solicitation(s). 

Thank you for taking the time to submit a response to this request.