SATOC FOR SHIPBOARD TYPE AND TEST SITE MAINTENANCE

Construction Magnitude between $10 million and $25 million

1.1  SCOPE

a. Furnish construction industrial support to the Naval Surface Warfare 
Center, Philadelphia Division (NSWCPD) in Philadelphia PA.

b. Navy shipboard machinery and related support systems and components that 
will be the focus of the industrial support services required, may include, 
but shall not be limited to, the following:

(1) Electrical power systems: switchboards, motor-generator sets,   
transformers, distribution equipment, power converters and cabling for 
systems up to 50MW and 13.8 KV.
(2) Gas and Steam Turbine Engines and Generators.
(3) Diesel Engines and Generators.
(4) Shipboard Propulsion Motors and similarly rated Load Generators and 
Waterbrakes.
(5) Control systems and control rooms: control consoles, control interface 
units, system instrumentation, control cabling, networking switches and 
fiber optic cable systems, video camera systems, communication systems, 
building automation systems, fire alarm systems and data acquisition 
systems.
(6) Machinery Shafting and Transmission systems: reduction gears, speed 
increasing gears, clutches, bearings, shafting, machinery couplings and 
alignment systems.
(7) Machinery Foundations: welded plate structures, concrete-filled steel 
structures, precisely machined mounting surfaces, and shock and 
vibration mount systems.
(8) Structures: equipment platforms, access platforms and walkways, engine 
intake and exhaust ducting, auxiliary equipment foundations, and piping 
and electrical system support structures.
(9) Piping systems: fuel oil, lube oil, hydraulic oil, cooling water, sea 
water, fresh water, deionized water, domestic water, drains, compressed 
air, start air, FM 200, and engine bleed air systems (systems with 
pressures up to 6500PSI and temperatures as high as 1200 degrees).
(10) Heating, Ventilation and Air Conditioning (HVAC) systems.
(11) Civil systems: concrete foundations, piles, bricks, blocks, roof 
systems, walls, flooring, etc.
(12) Hull and deck machinery: weapons handling and stowage equipment 
elevators.
(13) Auxiliary equipment: pumps, compressors, blowers, fans, heat 
exchangers, etc.
(14) Any other shipboard machinery, equipment or related systems regardless 
of type or size required by task order.

b. Provide construction support in accordance with design drawings and 
design specifications provided by the Government with each individual task 
order.

c. Construction support shall primarily be in any of the Navy shipboard 
machinery, located on the Philadelphia Naval Business Center, Philadelphia, 
PA 19112-5083.  Where adequately available, the Contractor shall connect 
installed equipment to existing utilities required for the equipment being 
installed.  Tie-in locations for utility points of connections shall be 
submitted to COR/TPOC who then is responsible to provide a copy to Code 362 
for review and approval.  Equipment installation shall be complete and 
operable in all respects including connection to all utility sources, 
installation of controls, emergency shutdown, etc.

d. When required, provide construction, renovation, demolition, and 
facility construction/maintenance support for buildings, Navy shipboard 
machinery, located on the Philadelphia Naval Business Center, 
Philadelphia.  This support shall include, but not be limited to: minor 
construction; office renovations; office configuration and moving; roof 
repair and replacement; roof preventative maintenance; heating, 
ventilation, and air conditioning; cooling system controls; fuel system 
repair; electrical system upgrades; and elevator certification and 
maintenance.