SOLICITATION - ASR-9 CENTRIFUGAL BLOWERS - MMAC OKC

AI Summary

The FAA is soliciting proposals for the procurement and upgrade of 100 H03 Exhaust Blowers and 100 H01 Centrifugal Blowers. The contractor will be responsible for all labor, materials, and equipment necessary for the upgrades, including testing and balancing of the blowers. Delivery of production units is required within 300 days after receipt of order.

Contract details

Solicitation No.: 6973GH-25-Q-00157_ASR-9_Blowers
Notice Type: Solicitation
Set-Aside: Total Small Business Set-Aside (FAR 19.5)
Posted Date: July 29, 2025
Response Deadline: August 15, 2025
NAICS Code: 334419 AI guide
PSC / Class Code: 4410
Issuing Office: 6973GH FRANCHISE ACQUISITION SVCS
Sub-Agency: FEDERAL AVIATION ADMINISTRATION
Agency: DEPARTMENT OF TRANSPORTATION
Primary Contact: Raymond Lena
City: OKLAHOMA CITY
State: OK
ZIP Code: 73125
AI Product/Service: product

Description

2. SCOPE OF WORK
The contractor must furnish all labor, facilities, equipment, and materials to procure and upgrade the Kooltronics Blowers for the FAA as outlined in each section that follows. The specific quantities of units include the following:
1. One Hundred (100) H03 Exhaust Blowers - K3BB58-3
2. One Hundred (100) H01 Centrifugal Blowers - K3BB58-2
3. Ship Blowers to Electro Mechanex LLC to perform the following updates:
a. Dismantle, Clean Parts & Inspect all components.
b. Check Windings for condition and integrity (Resistance, Hi-Pot, Surge Comparison Inductance testing & Ground Capacitance).
c. Measure all Mechanical fits and record the dimensions.
d. Dynamically Balance Rotor/Blower to a balance quality grade G2.5 (ISO 1940-1), for reduced vibration during operation.
e. Bore & Sleeve DE/NDE Endbell to Mfg specifications.
f. Fit Bearings in accordance with ABMA fitting procedures.
g. Clean and Bake Windings with fresh BMG Polyurea EM lubricant.
h. Assemble Motor and Test run at full rated voltage at 60HZ for full output speed.
i. Record and Document All Electrical and Mechanical test measurements.
j. Spray Paint the Motor Machinery Gray.
k. Re-machine motor end bearing cups; adding steel sleeves and precisely locating center to reduce electromagnetic force (EMF) imbalance.
l. Bearing Upgrade: Premium NTN Sealed Ball Bearing C3
m. Install high temperature, bearing thrust washers.
n. Bearing lubricant (BMG Gen 2 Polyurea Motor Grease) rated for temperatures above 200°F
o. Blowers dynamically balanced to a G2.5 grade.
p. Add grommets to the mounting holes on the flange.
3. REQUIREMENTS
3.1 Production Units
Delivery of production units shall begin NLT 300 days after receipt of order.
4. PREPARATION FOR DELIVERY
4.1 Preservation, Packaging, and Packing
Preservation, packaging, and packing shall be IAW Provision 61.

Key dates

July 29, 2025Posted Date
August 15, 2025Proposals / Responses Due

AI search tags

centrifugal blowers exhaust blowers equipment maintenance motor testing mechanical upgrades

Frequently asked questions

SOLICITATION - ASR-9 CENTRIFUGAL BLOWERS - MMAC OKC is a federal acquisition solicitation issued by DEPARTMENT OF TRANSPORTATION. Review the full description, attachments, and submission requirements on SamSearch before the response deadline.