US MOORINGS MACHINE SHOP HORIZONTAL MILL AND CNC TURNING CENTER PROCUREMENT

The U.S. Army Corps of Engineers (USACE), Northwestern Division, Portland District (CENWP) intends to solicit firms who are interested in submitting a competitive firm-fixed-price bid for this project. This announcement is for the US Moorings Machine Shop Horizontal Mill and CNC Turning Center Procurement Portland, Oregon (Multnomah County).

Work includes but is not limited to the following:

Provision and installment of one (1) Horizontal Milling Machine CNC capable with and Operator Workstation. CNC Milling Machine must meet the following requirements: Table size minimum 50” x 70”, Table load capacity minimum 20,000 lbs, X-Axis Travel minimum 95”, Y-Axis Travel minimum 78”, Z-Axis Travel minimum 55”, W-Axis Travel minimum 20”, Spindle that holds CAT-50, Boring spindle diameter minimum 4” or 110mm, Two Speed Spindle motor with speed up to 4000 RPM, Overall height not to exceed Seventeen (17) feet, Storage for minimum 40 Tools, Power 45KW motor, $50,000 Tooling Certificate for outfitting of shop specific tooling needs, and providing a minimum of two (2) days of onsite training for Machine Shop Operators.

Provision and installment of one (1) Y-Axis Horizontal Turning Center CNC (Precision lathe with live tooling) with Programmable Position Steady Rest bracket. CNC Turning Center must meet the following requirements: Self centering hydraulic steady rest, Variable speed chip conveyor with chip stripper, Chuck size minimum 12”, Maximum turning length of no less than 50”, Maximum turning diameter of no less than 16”, X-Axis Travel minimum 11”, Y-Axis Travel minimum 5”, Z-Axis Travel minimum 52”, Main Spindle Power 35HP at not less than 2600 RPM, Turret shall have a minimum Twelve (12) tool stations and operate at 5000 RPM, Turning Center overall dimensions shall not exceed 15’ length x 8’ width x 7’ height to fit existing site, $30,000 Tooling Certificate for outfitting of shop specific tooling needs and providing a minimum of two (2) days of onsite training for Machine Shop Operators.

The solicitation will be an Invitation for Bid (IFB). Evaluation criteria will be price. This acquisition will result in a single firm-fixed-price contract.

This procurement will be solicited under Full and Open Competition.

This synopsis is not a request for quotes (RFQ), proposals (RFP), or in an invitation for bids (IFB). This is a pre-solicitation notice indicating that a solicitation for a competitive acquisition for the award of one firm-fixed-price contract is intended to be issued via Contract Opportunities at SAM.gov. The tentative solicitation issuance date is 04 August 2025. The solicitation will not be issued less than 15 days from the date of this notice.

This announcement is for information and planning purposes only and is not to be construed as a commitment by the Government, implied or otherwise, to issue a solicitation or award a contract.

Bids will be due not less than 30 days from the date the solicitation is issued. The definitive bid due date and time will be stated in the solicitation and any associated amendments that may be issued.

Contractors are responsible for checking this page for any update(s) to this notice.

Pursuant to FAR 4.1102, firms must be System for Award Management (SAM)registered at the time their off er is submitted. Bids from offerors that have not registered or completed their online representations and certifications may be rejected. The initial registration process in SAM may take several weeks. Registration instructions may be obtained, and online registration may be accomplished, at www.SAM.gov.