AN_APG66_TRANSMITTER_NSN5960014448163_PN588R901H02_ELECTRONTUBE

NSN:      5960-01-444-8163
P/N:      588R901H02
Noun:     Electron Tube
Application:  F-16 A/B AN/APG-66 Transmitter

SECTION C:

1. QUALIFICATION REQUIREMENTS THAT MUST BE SATISFIED TO BECOME A QUALIFIED SOURCE

a.  Prequalification Notice/Sources Sought: The offeror shall notify the appropriate government 
Small Business Office or, if responding to a solicitation, the contracting officer in the 
appropriate government contracting office, of intent to qualify as a source for this Electron Tube.
b.  Facilities, Testing, and Inspection Capabilities: The offeror must certify to the government 
that they have, or have access to, the required facilities and equipment to manufacture, inspect, 
test, package, and store the item. The offeror shall make their facilities, equipment, tooling, and 
personnel available for evaluation and inspection by the government.

c.  Data Verification: The offeror must verify that he has a complete data package. This 
verification must include a complete list of all procedures, drawings, and specifications, 
including change notices, in the offeror’s possession including, at a minimum MANUFACTURER (97942) 
drawing 588R901H02. The offeror may also be required to produce copies of all applicable 
procedures, drawings, or specifications.
d.  Manufacture/Process Verification: The offeror must manufacture this item to conform to the 
government requirements as prescribed within the ESA-approved engineering/technical data package. 
The offeror must show compliance with Unique Identification (UID) requirements in accordance with 
DFARS 211.274 as prescribed within the ESA-approved engineering/technical data package. The offeror 
must provide, at their own expense, data showing the results of all quality, performance, and 
environmental evaluations conducted by the offeror to show compliance with the government 
requirements as prescribed by 416 SCMS/GUEAA. The offeror shall also identify its sources for 
materials and its standards for internally used processes.

e.  Test and Evaluation and/or Verification: The offeror, at their own expense, shall prepare and 
submit to 416 SCMS/GUEAA for their prior approval, a qualification test plan/procedure detailing 
how they intend to verify compliance with all performance, environmental, mechanical, and quality 
assurance requirements identified by Drawing 588R901H02. After completion of the approved 
qualification testing, the offeror shall be required to submit a complete test report of the 
results to 416 SCMS/GUEAA for their review and approval prior to the contract award. The government 
retains the right to exercise the option to inspect the testing processes, including on-site 
witnessing of any or all documented testing. To allow accomplishing this, the offeror shall notify 
the government at least 30 days in advance of the occurrence of any testing that will be used as a 
basis for qualification. The offeror’s facilities shall be made available for government inspection 
during these tests.
f.  Qualification Article Verification: The offeror must provide, at their own expense, a 
pre-contract award qualification article for evaluation by the government. This article must comply 
with all of the requirements of Drawing 588R901H02. This article shall be subjected to a form, fit, 
and

29-Sep-22                      Section C                         1/3

MANUFACTURING QUALIFICATION REQUIREMENTS
NSN:      5960-01-444-8163
P/N:      588R901H02
Noun:     Electron Tube
Application:  F-16 A/B AN/APG-66 Transmitter

function evaluation to demonstrate compatibility with the weapon system and to evaluate the 
manufacturing capability of the offeror. Offerors will be notified whether or not their 
qualification article passed or failed the required qualification testing within 90 days of 
submitting a product for qualification testing. Note that successful completion of the 
qualification testing does not guarantee any contract award. If the offeror is deemed qualified and 
awarded the contract, a post-contract award first article exhibit may be required to verify 
production capability.
g.  Qualification Requirement Cost Estimate: Estimated likely costs for testing and evaluation, 
which will be incurred by the potential offering party to become qualified: $3000.

h.  Qualification Time Completion Estimate: It is the estimate of the engineering support activity 
that completion of this qualification effort should require 180 days. This is based on complexity 
of the Electron Tube and other factors.

i.  Qualification Time Limitation: An offeror may not be denied the opportunity to submit and have 
considered an offer for a contract if the offeror can demonstrate to the satisfaction of the 
contracting officer that the offeror (or its product) meets these standards for qualification or 
can meet them before the date specified for award of the contract. The award will not be delayed to 
provide the vendor with an opportunity to demonstrate its ability to meet the standards specified 
in this qualification requirement.
j.  Evaluation of Proposals Not Previously Qualified: The offeror must be fully qualified in order 
to be eligible for a contract award. Therefore, the offeror must fulfill all of the requirements 
stated, in writing, in the qualification requirement before the date specified for award of the 
contract. Once all requirements are met, the offeror will be listed as an approved source for this 
item. Approval, however, does not guarantee subsequent contract award.

29-Sep-22                      Section C                         2/3

MANUFACTURING QUALIFICATION REQUIREMENTS
NSN:      5960-01-444-8163
P/N:      588R901H02
Noun:     Electron Tube
Application:  F-16 A/B AN/APG-66 Transmitter

2. SOURCE QUALIFICATION WAIVER REQUIREMENTS

Sources who meet any of the following source Qualification Waiver Criteria (QWC) may apply for a 
waiver of all or part of the qualification requirements. If a waiver is granted and the offeror is 
awarded a contract, the offeror may still be required to provide a post-contract award first 
article exhibit to verify production capability:

a.  QWC1: The potential source submits written certification that the articles have been supplied 
to the government or original equipment manufacturer (e.g., DD Form 250, Material Inspection and 
Receiving Report, Purchase Order invoice, etc).
b. QWC2: NA

c.  QWC3: A source qualified to provide an assembly is usually qualified to provide subassemblies, 
major components, and items of that assembly.
d.  QWC4: A source qualified to provide earlier dash numbers of a basic P/N may be qualified to 
provide other dash numbers of that same basic P/N, provided there is no increase in complexity, 
criticality, or other relevant requirements.

e.  QWC5: A source qualified to provide a similar or like item can be qualified to provide the 
required item. However, for approval, the engineering authority must verify that there is no 
increase in complexity, criticality, or other requirements over that of the similar item. At a 
minimum, the source shall provide a complete set of drawings for the similar item and written 
proof, such as purchase orders, shipping documents, etc., to show that the similar item was 
provided to the original equipment manufacturer or DoD.
f.  QWC6: A source previously qualified to provide an item, but which has been purchased, sold, 
merged, absorbed, reformed, split, etc., may qualify if it can be established that the 
qualification is currently with the requester and that the requester has the same or equivalent 
facilities, tooling, equipment, personnel, and utilizes the original forging, castings, etc., in 
the manufacturing process.

g. QWC7: NA